Sunday, September 14, 2008
11.09, the opening image of the season
This is a first light for my new equipment, Tokina AT-X 300mm f2.8 manual focus lens.
North America and Pelican nebula shooted @ f2.8 with Baader 7nm H-alpha filter.
I will shoot later S-II and O-III channels to this target (those two filters are new as well)
to create a false color narrowband image.
Even full open, this lens is very sharp and large diameter (112mm) combined to a
fast optics (f2.8) collects photons fast. Exposure time to this relatively deep image was
only 5 x 900s = 1h and 15min.
This fast lens has a very narrow critical focus zone, about 17microns. (17/1000mm !)
I updated my homemade focusing system for this lens to use it with FocusMax software.
Camera: QHY8 (Red pixels only)
Guiding: Lodestar guider and PHD-guiding with LX200 GPS 12"
Exposures: 5 x 900s with Baader 7nm H-alpha filter
Lens: Tokina AT-x 300mm @ f2.8
-
NO STARS
-
Here is a same image but all stars are removed.
This way more details are visible in nebula area
and total amount of nebulosity is revealed.
New equipmets and some development work.
New focusing system for the Tokina 300mm lens.System is based on temperature compensating TCF-s focuser and
it's very accurate.
I printed an angular scale and glued it to telescope ring.
The ring is supporting the front end of the heavy lens and same time works
as an indicator to a camera angle.
New flat "box" with EL-sheet.
Last winter I had lots of problems with bad flats.I managed to buy one A2 size sheet of electro luminescent material.
(Here is the link: http://www.posterpoweruk.co.uk/page5.htm )
It works as a perfectly uniform light source and delivers perfect astronomical flats.
I used unexpencive, light weight, plastic frames to protect the light source.
(Not the one with real glas, it's too heavy for the purpose)
As seen in the image, I used two rubber bands with hooks to attach the panel.
In action
Angular scale for the AO-system
This is a simple solution to easy up guidestar selection with SXV-AO active optics sytem.When OAG (Off Axis Guider) is used, the selection of the guidestar is very important.
Now it's relatively easy to put whole imaging system to an angle readed from
star chart.
The scale is printed to a sticker material and can be seen in upper image.
Subscribe to:
Posts (Atom)
