Sunday, February 15, 2009
4. Universe Today article
A new article by Tammy Plotner in Universe Today: http://www.universetoday.com/2009/02/14/v-is-for-valentine-v838/
At this time I turned the Hubble Space Telescopes image of V838, in Monocerotis, to the spatial format. -
Cross Vision version
-
Distances and shapes in 3D-image are visualizations, since we don't have enough information to buil an accurate model. However, the 3D-model of the target is not only a lucky guess as there is many known "anchor points" in the image, witch can be used to estimate the actual forms and the relative distances.
Parallel Vision version
Parallel Vision version
Thursday, February 12, 2009
A POD
As seen in the image, my Observatory locates in very light polluted location.
I bought this observatory dome from Ian - Altair Astro UK.
The POD (Persomnal Observatory Dome) is manufactured by a
Canadian company, SkyShed Obsevatories,
After long thinkikg I ended up to this model.
Mainly becouse there was much good feed back about the system.
the other reason was the reasonable price and easy assembly.
Becouse I'm imaging from midle of the town, the outlook of the tower is important too.
I don't want people to complain about ugly shed in the roof deck in the midle of town.
(It's clearly visible to the opposite park)
Inside the dome, there is a 12" Meade LX200GPS on the 700mm steal pier
and lots of assesories.
Even though, there is plenty of space to walk around the scope.
-
The model of the observatory is somewhere between traditional dome and roll off shed.
I have tested it under cloudy sky and it will give a really good protection against winds.
An other great thing is, that now I can just close the dome and leave everythin ready for the next imaging session.
-
In this type of observatory, there is a problem with imagingn directly to the Zenith.
I solved this problem by a simple modification.
Instead placing telescope pier off center, I made the whole dome to slide away
to clear the Zenith view.
When access to the Zenith is not needed the dome can be pulled back to maximize
the wind protection.
In this image the slideing system is visible. It's a very simple solution where slitin the plywood works as a guide and everything can be locked down by a wing nut attached to an
anchor bolt.
In near future I will attach six wheels under the dome to make it move smoothly.
In above image is a principle, how standard furniture whells will be placed.
Main dimensions of the POD ( Inches)3. Universe Today article
s
A new article by Tammy Plotner in Universe Today:
At this time I turned the Hubble Space Telescopes image of "Cat's eye" Nebula
to the spatial format.
-
At the article, there was a comment about error in the original image pair by B. Crumb.
He wrote:
"The axis of the bipolar flow of the planetary nebula doesn't look quite right to me. It doesn't seem to match the velocity measures made of various features within the nebulosity, nor the calculated about 32 degrees to the line of sight. With blunt criticism, Jukka Metsavainio might just like to check a few paper on the morphology of planetary nebula (G.Pascoli work of 1999 comes to mind.), to make sure the stereo images show what has already been derived.Nice pic though."
-
I have fixed the image pair after the previous comment, thanks B. Crumb.
The Parallel Vision version of fixed Cat's eye Nebula. Hubble Heritage image edited by me.Tuesday, February 3, 2009
2. Universe Today article
It looks like Tammy Plotner and I will work together for some time.
Yesterday there was a new article in Universe Today by Tammy.
This time I turned one of the Hubble Heritage images,
MGC281, to a Stereo Pair format.
-
Distances and shapes in 3D-image are visualizations,
since we don't have enough information to buil an accurate model.
However, the 3D-model of the target is not only
a lucky guess as there is many known "anchor points" in the image,
witch can be used to estimate the actual forms
and the relative distances.
-
You can read the article from:
Subscribe to:
Posts (Atom)
